Wheel; 8" x 3"; V-Groove (7/8) Ductile Steel; Roller Brng; 3/4" Bore; 3-1/4" Hub Length; 5000#
When selecting a wheel, make sure to get the weight capacity needed along with the diameter, width, and axle bore. In some cases, the hub length is critical to a good fit. As with casters, the larger the wheel, the easier the push will be. Pay attention to hard vs soft wheels, propensity to flatten and marking vs non-marking.
Remember that larger diameter equates to ease-of-roll while wider width equates to higher weight capacity.
V-Groove wheels are constructed from grey iron castings. The 90 degree grooves, machined into the face of the wheels, direct the load to each face of the angle track. Can also be used on a flat surface. Ideal for heavy loads. Look for 7/8" or 1-3/8" wide grooves. The groove depth is half of the width.
Wheel Diameter: 8"Tread Width: 3"Material: V-Groove (7/8) Ductile SteelLoad Rating (Per Item): 5000 poundsBearing: Roller BrngBore: 3/4"Hub Length: 3-1/4"Shipping Weight: 24 lbs.Usually Ships in: 1 week (may be affected by quantity ordered)
There are currently no product reviews.
Products are warranted for basic operations and performance. Products are guaranteed to match the product description for fit, form and function. (Color or slight tooling differences are subjective and may not be covered by warranty. Obvious color errors - such as you requested blue tread and received red - will be fully addressed.)
Inherent quality issues become obvious immediately upon placing the products into service.
Failures resulting after weeks or months of service likely result from environmental or usage factors.
When in doubt, please contact us to discuss options. Our goal is to help address your needs and encourage your long term trust.
Purchased the wrong item? No worries. Returns are usually allowed if the wrong item was purchased. Just contact Apollo Caster within 10 days of receiving your order for an RMA and the simple return instructions. Buyer pays return shipping and a small restock fee.
