Wheel; 5" x 2"; ThermoPlastic Rubber Donut (Gray); Roller Brng; 3/4" Bore; 2-7/16" Hub Length; 350# (Item #87536)

Wheel; 5" x 2"; ThermoPlastic Rubber Donut (Gray); Roller Brng; 3/4" Bore; 2-7/16" Hub Length; 350#

When selecting a wheel, make sure to get the weight capacity needed along with the diameter, width, and axle bore. In some cases, the hub length is critical to a good fit. As with casters, the larger the wheel, the easier the push will be. Pay attention to hard vs soft wheels, propensity to flatten and marking vs non-marking.

Remember that larger diameter equates to ease-of-roll while wider width equates to higher weight capacity.

Thermoplastic Rubber (TPR) wheels are precision molded and mechanically locked to a durable polyolefin core to provide an economical wheel for many applications. They provide a smooth, cushioned ride and can overcome small debris and obstacles on the floor. They offer floor protection, are non-marking and non-conductive. These often have various brand names by various manufacturers and can be flat or crowned.

TPR are considered soft wheels which may experience flat-spotting even when loaded within the acceptable weight limits. Flat-spotting is more noticeable in warmer weather. The flat-spotting will roll-out and dissipate after a few minutes of rolling, depending on the size of the standing load and extent of the flat-spotting. This is a normal occurrence of these wheels and is not a product failure. If your application cannot tolerate this temporary condition, another material type may be preferable.