Check out our brand new Compare Products page. Click the Add to Compares button on any product detail page.
Wheel; 5\"x1-1/4\"; Thermoplastized Rubber (Gray); Delrin Bearing; 3/8\" Bore; 1-1/2\" Hub Length; 280# (89205)


Images shown are representations only. Refer to product descriptions for exact specifications. Please call if specific aspects of the appearance are required.

Wheel; 5"x1-1/4"; Thermoplastized Rubber (Gray); Delrin Bearing; 3/8" Bore; 1-1/2" Hub Length; 280# (89205)

$6.37

  • Shipping Weight: 1.5lbs
Wheel; 5"x1-1/4"; Thermoplastized Rubber (Gray); Delrin Bearing; 3/8" Bore; 1-1/2" Hub Length; 280# (89205)
Volume Pricing - Call for higher quantities
1-7
$6.37
8-15
$5.84
16-33
$5.70
34-59
$5.56
60+
$5.35
Qty :

Estimated shipping costs are available upon adding to cart.
Description

Wheel; 5"x1-1/4"; Thermoplastized Rubber (Gray); Delrin Bearing; 3/8" Bore; 1-1/2" Hub Length; 280# (Shepherd 009022)

  • Wheel Diameter: 5"
  • Tread Width: 1-1/4"
  • Material: Thermoplastized Rubber (Gray)
  • Load Rating (Per Item): 280 pounds
  • Bearing: Delrin Spanner
  • Bore: 3/8"
  • Hub Length: 1-1/2"
  • Shipping Weight: 1.5 lbs.
  • Usually Ships in: 24 hours (may be affected by quantity ordered)


  • When selecting a wheel, make sure to get the weight capacity needed along with the diameter, width, and axle bore. In some cases, the hub length is critical to a good fit. As with casters, the larger the wheel, the easier the push will be. Pay attention to hard vs soft wheels, propensity to flatten and marking vs non-marking.

    Remember that larger diameter equates to ease-of-roll while wider width equates to higher weigth capacity.

    Thermoplastic Rubber (TPR) wheels are precision molded and mechanically locked to a durable polyolefin core to provide an economical wheel for many applications. They provide a smooth, cushioned ride and can overcome small debris and obstacles on the floor. They offer floor protection, are non-marking and non-conductive. These often have various brand names by various manufacturers and can be flat or crowned.

    TPR are considered soft wheels which may experience flat-spotting even when loaded within the acceptable weight limits. Flat-spotting is more noticeable in warmer weather. The flat-spotting will roll-out and dissipate after a few minutes of rolling, depending on the size of the standing load and extent of the flat-spotting. This is a normal occurrence of these wheels and is not a product failure. If your application cannot tolerate this temporary condition, another material type may be preferable.

    Reviews (0)
    Holiday: 3 Easter
    Get in Touch.

    Have questions about our products? Wondering what caster would best suit your needs? Just saying hi? Drop us a line here!

    This value is required.
    This value is required.
    This value must be a valid Email Address.
    This value is required.
    Cart