(image for) Caster; Swivel; 5" x 2"; Cast Iron; Top Plate; 4"x4-1/2"; hole spacing: 2-5/8x3-5/8 (slotted to 3x3); 3/8 bolt; Zinc; Roller Brng; 1000#; Top lock brake (Item #67599)(image for) Caster; Swivel; 5" x 2"; Cast Iron; Top Plate; 4"x4-1/2"; hole spacing: 2-5/8x3-5/8 (slotted to 3x3); 3/8 bolt; Zinc; Roller Brng; 1000#; Top lock brake (Item #67599)


Images shown are representations only. Refer to product descriptions for exact specifications. Please call if specific aspects of the appearance are required.

Caster; Swivel; 5" x 2"; Cast Iron; Top Plate; 4"x4-1/2"; hole spacing: 2-5/8x3-5/8 (slotted to 3x3); 3/8 bolt; Zinc; Roller Brng; 1000#; Top lock brake (Item #67599)

As Low As $26.34

  • Shipping Weight: 7.4 lbs
Volume Pricing - Call for higher quantities
1-7
$28.60
8-11
$27.20
12-23
$26.77
24+
$26.34
Qty :

Estimated shipping costs are available upon adding to cart.
Description

Caster; Swivel; 5" x 2"; Cast Iron; Top Plate; 4"x4-1/2"; hole spacing: 2-5/8x3-5/8 (slotted to 3x3); 3/8 bolt; Zinc; Roller Brng; 1000#; Top lock brake

Cast iron, forged steel and ductile steel wheels offer the ultimate in load capacity and impact strength. The wheels feature heavy cross section castings for heavy duty use, abrasion resistance and a long service life. They are resistant to abrasions and require minimal effort to start-up and push loads. Built for high capacity applications, the cast iron wheels can withstand extreme heat. These are avialable in a wide variety of sizes, weight capacities, and bearing types.

Specs

  • Wheel Diameter: 5"
  • Tread Width: 2"
  • Material: Cast Iron
  • Load Rating (Per Item): 1000 pounds
  • Finish: Zinc
  • Click for Connector Details: Plate (4"x4-1/2"; holes: 2-5/8"x3-5/8" slots to 3"x3"; 3/8" bolt)
  • Bearing: Roller Brng
  • Tread brake
  • Wheel Locks: Tread brake
  • Load Height: 6-1/2"
  • Swivel Radius: 4-7/8"
  • Shipping Weight: 7.4 lbs.
  • Usually Ships in: 24 hours (may be affected by quantity ordered)

  • • Case hardened double ball raceways provide extra capacity & durability. • Top plate and legs are made out of 1/4” cold forged steel. • Corrosion-resistant zinc plated finish. • 5/8” nut and bolt kingpin, 2-1/2” fork spacing. • 1/2” zerk axle & lock nut on caster sizes 3-1/4” to 8” , 5/8” axle on 3” casters. Zerk fittings also in swivel bearings & most wheels. • Applications: Miscellaneous carts, platform trucks, wire shelving units, heavy appliances, general duty material handling, vending machines, warehouse & factory applications, heavy foodservice & institutional equipment, textile applications, tool boxes

    Related Items
    Accessories
    Also purchased
    Reviews (0)
    Warranty/Returns

    Products are warranted for basic operations and performance.  Products are guaranteed to match the product description for fit, form and function. (Color or slight tooling differences are subjective and may not be covered by warranty. Obvious color errors - such as you requested blue tread and received red - will be fully addressed.) Inherent quality issues become obvious immediately upon placing the products into service. Failures resulting after weeks or months of service likely result from  environmental or usage factors. When in doubt, please contact us to discuss options. Our goal is to help address your needs and encourage your long term trust. Purchased the wrong item? No worries. Returns are usually allowed if the wrong item was purchased. Just contact Apollo Caster within 10 days of receiving your order for an RMA and the simple return instructions. Buyer pays return shipping and a small restock fee.

      (image for) Holiday: 03 Easter


      Quick Email!

      Have questions about our products? Wondering what caster would best suit your needs? Just saying hi? Drop us a line here!

      This value is required.
      This value is required.
      This value must be a valid Email Address.
      This value is required.
      Cart